Epson cloud printer setup how to#
Epson cloud printer setup install#
Epson cloud printer setup driver#

If you have an email-enabled Epson printer, you only need to download the Epson remote printer driver on your computer along with the Epson Connect Printer Setup Utility to set up and print from your printer.

Epson cloud printer setup install#

It is essential to install this utility on your computer to enable features like scan to cloud, Epson email print, and remote print for your Epson printer. Once this utility is installed, you can send print commands to your printer from any device capable of sending an email. The Epson printer setup utility is a software file that enables you to configure your Epson printer with your computer, laptop, or phone, allowing you to print various documents, pictures, emails, and more.

Alternatively, refer to your Network User's Guide or Start Here sheet for assistance.If you're unfamiliar with the Epson Connect Printer Setup Utility and would like to learn what it is and how it functions, you've come to the right place. See the following Related Article for help. Once you have restored the All-In-One to its default settings, perform the setup again using either the bundled Epson SetupNavi or via the printer control panel itself. See the product user guide for help with resetting the Network Settings.All models: Reset the All-In-One's Network Settings, then reinstall the software.We recommend that you reset the Network Settings and then follow the wireless setup again. If this fails when using the All-In-One via Wi-Fi, it's possible that Wireless LAN on the All-In-One has been disabled or incorrect settings have been made.In TCP/IP Setup, select Manual and assign a valid IP address and subnet mask. LCD panel method: Using the buttons on the printer/LCD panel, go to Setup > Network Settings > General or General Network Setup. Also, when a gateway value is set, use the same value as the IP address for the wireless router. For the subnet mask, 255.255.255.0 is normally set for small-scale networks and all devices in the LAN use this value.1Įxample setting on the printer: 192.168.1. IP address for the broadband router: 192.168.1. (When the router is a DHCP server or when there is another DHCP server in the LAN, set a value that does not conflict with the ID address range allocated by the DHCP server.) In the final segment, set a unique numerical value for your printer within a range of 1 to 254.

All IP addresses are written in segments of four numerical values. See the broadband router's (or access point's) User's Guide. Check the IP address for the broadband router (or access point) connected to your computer.You can do this during the software installation or the All-In-One's LCD panel.

If DHCP is turned off, an IP address will not be automatically assigned - instead you must manually assign an IP address to the printer during setup.

Epson cloud printer setup how to#

If the IP address is 0.0.0.0, check if the automatic DHCP function on your router turned off - check the router/access point documentation for help on how to check this. With DHCP enabled, a router will automatically assign an IP address to devices detected within its range. See the documentation for your router or access point for instructions. You may be able to do this by turning it off and back on again, or you may need to follow a different procedure to reset it. Refer to the product user guide for instructions on how to restore default settings. Reset the All-In-One's Network Settings.beginning 169.xxx) is assigned to your Epson device, this problem indicates that the router (wireless network) did not communicate with the All-In-One when you installed the software.